|
Contents
531 Fire Response of High-Performance Concrete Frames and Their Post-Fire Seismic Performance
Jian-Zhuang Xiao, Jie Li, and Zhan-Fei Huang
541 Edge-Column Slab Connections under Gravity and Lateral Loading
Edward Anggadjaja and Susanto Teng
552 Bond in Flexural Members with Plain Steel Reinforcement
Lisa R. Feldman and F. Michael Bartlett
561 Behavior of Slab-Column Connections of Existing Flat-Plate Structures
Ying Tian, James O. Jirsa, Oguzhan Bayrak, Widianto, and Jaime F. Argudo
570 Flexural Strength Design of Concrete Beams Reinforced with High-Strength Steel Bars
Robert F. Mast, Mina Dawood, Sami H. Rizkalla, and Paul Zia
578 Experimental Validation of Strut-and-Tie Method for Complex Regions
Daniel Kuchma, Sukit Yindeesuk, Thomas Nagle, Jason Hart, and Heui Hwang Lee
590 Where is Shear Reinforcement Required? Review of Reasearch Results and Design Procedures
Michael P. Collins, Evan C. Bentz, and Edward G. Sherwood
601 Behavior of Anchors in Cracked Concrete under Tension Cycling at Near-Ultimate Loads
Matthew S. Hoehler and Rolf Eligehausen
610 Mechanism Analysis for Concrete Breakout Capacity of Single Anchors in Tension
Keun-Hyeok Yang and Ashraf F. Ashour
619 Seismic Performance of Reinforced Concrete Slab-Column Connections with Thin Plate Stirrups
Thomas H.-K Kang and John W. Wallace
628 Characteristics of Compressive Stress Distribution in High-Strength Concrete
Halit Cenan Mertol, Sami Rizkalla, Paul Zia, and Amir Mirmiran
636 Bond Strength of Nonmetallic Reinforcing Bars
Christopher P. Mosley, A. Koray Tureyen, and Robert J. Frosch
645 Discussion
664 In ACI Materials Journal
| 
